What should I do if the hammer crusher stops?
The hammer crusher has the advantages of simple structure, convenient operation and high production efficiency. The crushing operation can be carried out on materials such as barite, limestone, terrazzo, silice, coal, coke, gypsum, aluminum sulfate and slag. Suitable for mining, building materials, chemicals, metallurgy and other industries.
What should I do if the hammer crusher suddenly stops in the production process? Let me briefly talk about it:
1. The brake caused by the low voltage. In this case, it is only necessary to adjust the voltage of the workplace.
2. The working environment is bad, the workload is large, causing serious damage to the bearing, then the replacement of the new bearing can be put into production.
3. The eccentric shaft is stuck, and the eccentric shaft is tightly tightened, so that there is no gap on both sides of the bearing housing of the frame, so that the eccentric shaft is stuck and cannot be rotated. In this case, the tightening bushing needs to be reinstalled or replaced.
4. The corner belt is too loose, because the belt of the drive sheave is too loose, causing the belt to slip, then the belt must be replaced.
In production, maintenance and maintenance work should be carried out on time, which can effectively improve production efficiency and extend the service life of the equipment. SBM is a professional hammer crusher manufacturer with more than 30 years of R&D and production experience. If you have any questions, please feel free to contact our online customer service staff.