Structure and maintenance precautions of fluorite cone crusher

Fluorite is a common halide mineral. Its main component is calcium fluoride, which is an important mineral for extracting fluorine. Its use value is very high, widely used in metallurgy, chemical industry, building materials and other industries, with the advancement of science and technology, the application prospects will become more and more broad.

The Mohs hardness of fluorite is 4 and the hardness is high. During processing, the jaw crusher needs to be used for primary crushing, and then the cone crusher is used for secondary crushing. If the size of the fluorite mineral is not particularly large Next, the primary crushing link can be omitted, and a cone crusher can be directly used for crushing.

Based on the high hardness characteristics of fluorite, SBM has specially produced a fluorite cone crusher, which is particularly suitable for crushing 65-300mm fluorite blocks to related particle sizes.

Fluorite cone crusher structure

Fluorite cone crusher is mainly composed of frame, eccentric sleeve, fixed cone, moving cone, lubrication system, hydraulic system, etc.

1. The frame is composed of two upper and lower frames, the middle is connected by hydraulic cylinders, and there are liners and protective covers.

2. The eccentric sleeve is equipped with a bushing inside, a large bevel gear and a thrust bearing are installed at the lower part, and a weight assembly is also installed.

3. The fixed cone is mainly composed of an adjusting sleeve and a fixed cone liner, and the adjusting sleeve is pressed on the frame by a spring screw.

4. The moving cone is mainly composed of a moving cone, a main sleeve, a moving cone liner and a distribution plate. The moving cone is press-fitted on the main shaft.

5. Lubrication system consists of lubricating oil tank, motor oil pump, filter device, cooling device and control device.

6. The hydraulic system consists of a fuel tank, a motor oil pump, a filtering device, a control device, and a safety protection device.

Maintenance of fluorite cone crusher

1. The bearing load is large, and the bearings must be lubricated frequently, and the injected lubricating oil needs to be sealed and cleaned.

2. The degree of wear of the wear parts is high, so they should be checked frequently and replaced in time.

3. During the operation of the machine, the amount of vibration is large, and the bolts are easy to loosen, so they must be firmly fixed.

The high output, good quality and uniform particle size of the fluorite cone crusher produced by SBM have greatly promoted the overall development of the fluorite processing industry. Welcome new and old customers to come and buy.