Installation and maintenance instructions for wheel sander

Wheel type sand washing machine is a kind of equipment for sand washing, which is usually used together with sand making machine, vibrating screen, feeder, crusher, etc. it is an indispensable product in sand making. Its installation and maintenance is a very important link, this article will do a detailed introduction for you.

I. installation steps of wheel type sand washing machine

1. At the initial stage of installation, the infrastructure should be firm. It can be installed on the concrete and fixed with foundation bolts, so that the sand washing machine can be more stable and safe in the process of operation.
2. During the installation, pay attention to the coordination between the host body and the horizontal and vertical, and avoid tilting.
3. Check whether the bolts are loose after installation.
4. The power line and control switch of the equipment must be set reasonably, and it should be checked for conformity many times.
5. After the above installation is completed, the operator can conduct no-load test run of the machine and put it into production after everything is normal.

II. Maintenance measures for wheel type sand washing machine

In the long-term work process, the sand washing machine must be maintained reasonably, so as to extend the service life of the machine. SBM shares the following maintenance measures for you.

1. Since the bearing is the whole weight of the machine, the maintenance of the bearing is essential. Usually, the bearing should be lubricated and cleaned more.
2. The newly installed tire is easy to loosen, and the operator needs to check it regularly.
3. Vulnerable parts need to be inspected regularly. In order to reduce production troubles, worn parts need to be replaced at any time.
4. When the rotating gear is in operation, the operator shall immediately stop the machine for inspection when the impact sound is heard.

If you have any questions about the installation steps and maintenance measures of the above wheel sander, please feel free to contact us for consultation.