How to make your crusher "winter safely"?

At the time of the cold season, people are wearing thick cotton coats. In fact, the crusher is also afraid of cold, and it is necessary to do a good job in protecting the cold. The following SBM will tell you how to make your crusher safe for the winter.

1．Crusher cleaning

In the winter season, the cleaning work of the crusher can not be lazy. It is necessary to regularly clean the components of the crusher's chassis, working equipment and other parts. You can also check whether the parts are intact while removing the dirt.

2．Selection and replacement of oil

In the case of temperature comparison, the oil of the crusher is easy to wax, and the flow performance is not good, resulting in incomplete combustion and reducing the power of the machine. At this time, it is recommended to use diesel with a lower freezing point and replace the lubricating oil and grease.

3．Maintenance of crusher parts

When maintaining the cooling system of the diesel engine, the working state of the thermostat needs to be checked. Once mud and sand are found in the water tank, it must be removed immediately. In addition, the battery must be recharged frequently to maintain the preheating device.

In addition to the above points, it is also necessary to constantly check whether the brake fluid is sufficient. For harsh environments, production can be stopped appropriately.

Jaw crusher, impact crusher, cone crusher and other crushing equipment will not only reduce their service life in the low temperature environment, but also may freeze the water and oil in the crusher. Necessary.