What to watch out for when using a sand maker in winter

2019-12-30 | Author: SBM

As the temperature decreases, you must also pay attention to the correct method when using and maintaining the sand making machine. The following SBM introduces the precautions for using the sand making machine in winter.

1. In the winter, when the sand making equipment is ready to start, the corresponding operators and managers should learn the relevant knowledge of winter construction in advance, and make plans for materials, accessories and maintenance in winter construction to ensure the smooth construction of winter construction.

2. Every day before the machine is running, a comprehensive inspection of the machine should be performed, and the start switch should be preheated enough.

3. When the temperature is below zero, the transmission oil and lubricant of steel machinery, air compressors, ground pumps, tower cranes, sand making machines, etc. should be replaced with lubricants above -25 # to ensure normal operation. Because the temperature difference between day and night is large, it is required that the viscosity of the lubricating oil should be small with temperature. Avoid too high viscosity when the temperature is low, which makes starting and running difficult.

4. Equipped with a special person responsible for removing water, ice and snow deposits, and debris on the site of the sand washer to ensure that there is no water and ice on the sand washer's work site.

5. Under the condition of low temperature in winter, it will have a certain effect on the tension of the conveyor belt, and the problem of cracks may occur. During the work of the sand making machine, it is necessary to ensure that the lengths of the triangle belts on both sides are equal and the force is uniform. Avoid a series of problems such as belt breakage due to different tensile forces and affecting the production line.

SBM also has many other tips that can guarantee the efficient operation of your sand making machine in winter. You can contact our customer service at any time to obtain this knowledge.