The feeding method is also a factor affecting the output of the cone crusher

The new cone crusher uses a multi-cylinder hydraulic cavity cleaning system, which effectively reduces downtime and maximizes the hourly production of the equipment. However, in actual production, due to improper operation, the output will still be reduced. Today we will analyze the most common feed.

In the production process of the cone crusher, the level of its output depends directly on the requirements of the feeding equipment and the crushed material. If the feeding step is done well, there are several points to note.

First of all, it is better to set a sieve or other filtering device in front of the cone crusher before putting in the material, in order to screen the fine and viscous materials of the species to be crushed. This can effectively alleviate the blockage of the ore discharge port and avoid the cone crush Machine overload and reduction of crushing efficiency. In addition, a metal detector, a so-called iron removal device, should be installed to sort out unbreakable objects such as iron blocks.

Secondly, the feeder must feed evenly. The speed of the material entering the crushing cavity and the height of the fall must be calculated in advance. The productivity under this feeding method is high, and the product size is fine and uniform. When the cone crusher is stopped, feeding is not allowed.

The high output of the cone crusher is built on the premise of operating in accordance with regulations and maintaining on time. Therefore, in the process of equipment operation, not only feeding, each step is critical.