4 basic principles of m sand production layout

A good production process of manufactured sand needs to fully consider the reliability, rationality, economy and matching of the process. It needs to plan a reasonable process according to the rock properties, treatment planning and product aggregate requirements. What criteria should be followed for process layout? Here are four principles of production process:

1. Crushing Ratio

Crushing ratio refers to the ratio of raw material particle size to product particle size after crushing. Crushing ratio is often used to measure the crushing effect of crusher. The crushing ratio determines the number of crushing sections in the crushing process. The finer the particle size of the product, the more the number of crushing sections.

If the crushing link fails to reach the required crushing ratio, it will bring pressure to the next stage of crushing, form system failure and reduce the operation reliability. Therefore, the selection and distribution of crushing ratio are the criteria for attention.

2. Production Planning

When the planning of m sand production line is large, the primary demand consideration is economy. There are many kinds of equipment and schemes to choose. Under the condition of satisfying the demand, choosing the economical scheme can save production investment, reduce production cost and bring considerable economic benefits.

When the planning of m sand production line is relatively small, the primary consideration is the simplicity and rapidity of production line process, and try to use less crushing and screening to meet the production requirements.

3. Particle Shape and Granularity of Products

The particle shape and granularity of manufactured sand products are the primary technological objectives to measure the quality of products. As for concrete aggregate, there are requirements not only for the granularity, but also for the cube.

Different crushers produce different particle shape products. The particle shape of the products is related to the function of the crusher and the properties of the crushed materials.

4. Function of Crushing Equipment

Different varieties of crusher equipment have different crushing process and product granularity. The crusher with higher crushing ratio can reduce the number of crushing sections; The manufactured sand products produced by the crusher with lamination crushing principle are less in needle and sheet; There are many cubes of m sand produced by rotary crusher; The principle of "stone striking" in vertical impact crusher is better than that of "stone striking", but the power of sand making is slightly lower.

This article introduces four basic principles of production process layout of sand production line. It needs to pay attention to crushing ratio, production planning, particle shape and size of products and functions of crushing equipment. These four points should be paid attention to in the process of sand production to improve the efficiency and output of the production line