Ways To Improve Lubrication System Cleanness

Improve the cleanness of lubrication system in crushing and grinding equipment in beneficiation plant can ensure the smooth of lubricating oil circuit and the normal lubrication of the friction pairs, to reduce the damage of spare parts and avoid accidents. Besides, it can extend the service life of spare parts and ensure the normal running of mining machines. So in this article, we mainly talk about ways to improve the mining machine lubrication system cleanness.

Strengthen The Dust Management Of Crushing& Grinding Stage

There are several reasons for the dust producing in beneficiation plant, such as dust produced in the crushing stage, screening stage, transporting stage, dust produced because of pumping and dust reentrainment and so on. So, we must strengthen the dust management of crushing system in order to improve the working condition of equipment.

First of all, seal the dust source to avoid the spill over and spread of dust. Secondly, comprehensively adopt ventilation dust removal, water spray dust removal and electric dust precipitation etc.

Strengthen The Management Of Lubricating Oil

For the lubricating oil, we should firstly check its cleanness and put them in the cool and dry place according to different batches and classifications. Besides, the lubricating oil should not store for too long. And the lubricating oil must be filtered to reduce the impurities. So operators should regularly check if the sieve in filter is in good condition. Once find broken, operators should change it timely.

Strengthen Test Method And Equip Test Instrument

When we add qualified lubricating oil into the lubrication system and operate for some time, there will be change of the oil quality. Some mining machines even spill lubricating oil, so we need to add lubricating oil into the system frequently. In this case, the new added oil and the original oil will be mixed. It will be more difficult to ensure the quality of oil. In this case, we need to test the lubricating oil to see if the it meets standard for continue use.