What kind of feeding principle should cone crusher follow?

The efficient work of the cone crusher is based on the principle of correct feeding. While the ore fed needs to match the maximum feed size of the cone crusher, the feeding should also follow the following principles.

1. The amount of crushed material entering the crusher's crushing chamber should be equivalent to the amount of material supplied to ensure that the crusher is not overloaded. This can not only ensure that the cone crusher operates under its normal load, but also maximize the crushing efficiency.

2. The feed ore should be fed into the crusher evenly. It should not occur. Sometimes a large amount of material enters, and sometimes the feed is small. This can easily cause the load of the crusher to be unbalanced and seriously affect the crushing efficiency of the crusher.

3. After the ore enters the crushing cavity from the feed port, the material should be evenly dispersed in the effective crushing area of the crushing device in the crushing cavity, and there should not be a large amount of accumulation on the rotor crushing disk of the crushing cone.

The above are some suggestions that SBM summarizes for you about the feeding of cone crusher. If you have any questions about cone crusher or purchase intention, please feel free to contact us.