Southeast Asia 1000-1200TPH Granite Crushing Production Line

Material: Granite

Output Size: 0-5mm 5-10mm, 10-20mm

Capacity: 1000-1200TPH

Application: Infrastructure in Southeast Asia

Equipment: ZSW490*130 feeder, PEW1100 jaw crusher; CSB240 cone crusher; HPT300 Cone Crusher; VSI5X-1145 Impact Crusher; 2Y2460 Screen

Process flow

The granite is uniformly fed by ZSW490*130 feeder into European hydraulic jaw crusher PEW1100 for coarse crushing, and then gets into cone crusher CSB240 for secondary crushing. Furthermore, the material after crushing gets into 2Y2460 for screening and sieves returning charge for second crushing. Besides, the material less than 150mm gets into HPT300 for tertiary crushing; material more than 40mm gets into HPT300 for crushing again; Material less than 40mm enters into impact crusher VSI5X-1145 for shaping. Finally, the output sizes are 0-5mm 5-10mm, 10-20mm respectively.

Project Advantages

1. Use of new-type European hydraulic jaw crusher, V-type crushing cavity with large feeding, strong crushing force and large capacity; Discharge port size can be adjusted with wedge hydraulic system. It is convenient and can save debugging time. Besides, centralization lubrication makes maintenance convenient.

2. Three-stage crushing adopts multi-cylinder hydraulic cone crusher. HPT crusher has high crushing ratio and production efficiency. At the same time, through the design of the special crushing cavity and the rotating speed, volume of fine, cubic material is increased significantly. Multi-cylinder hydraulic cone crusher uses the thin oil lubrication, so that workers do not need to manually refuel per shift and labor cost is saved. Besides, it is also very convenient to repair equipment so production and operation costs can be cut down to some extent.

3. The production line adopts three-stage crushing, which achieves the optimization of crushing ratio at all levels of crushing. Screening after second crushing directly makes a part of product materials, not only reducing crushing pressure of third-sectional cone crusher, but also making capacity of the whole production line to be optimized.